There are three ways that Power station to recharge. Once at a standard household outlet electrical outlet , in vehicle during the journey via the cigarette lighter or via a Solar module , which is either permanently installed or flexibly adjustable.
Because the power station requires significantly less installation effort than a complete set for a motorhome, it doesn't need to be permanently installed, which is a particular advantage in winter. You can simply take the power station into your apartment, protecting it from outdoor temperatures, and charge it easily via a wall socket.
Let's take a closer look at the three ways to charge the power station:
Charging via wall socket
You can easily recharge your power station at home using a standard wall outlet. This means you don't have to start your journey with an empty power station; you can charge it partially at home so you arrive at your destination fully charged. The necessary cable is usually included.
Charging via the cigarette lighter
While driving your motorhome, you can charge the power station via the cigarette lighter socket. This is particularly useful on longer journeys, as it charges at approximately 100 watts per hour. The EcoFlow Mini Power Station (with 882 W) would thus be almost fully charged after an approximately 8-hour drive. Special adapters are available for connecting the power station to the cigarette lighter socket.
Charging with a solar panel
Once you reach your destination, you can immediately recharge the power station using a flexible solar panel, such as our SunFolder . It's important that the power station and the solar panel are compatible; otherwise, connecting them is very simple. You connect the adapter cable to the power station and then connect the cable to the power station. The charging process will then begin.
What do you need to pay attention to?
The purpose of a power station isn't to use it until it's completely discharged and then fully recharged, but rather to maintain its charge level using solar power. Simultaneous charging and discharging are possible with a power station. However, you should occasionally discharge your power station and then fully recharge it to calibrate it. The best place to do this is at home, between trips. Regardless of the charging method, it's important to protect the power station from extreme temperatures. Store and charge the device in a temperature-controlled environment to maximize battery lifespan.
What is the best option?
The best option is actually a combination of all possibilities. If you're currently traveling in your campervan, simply plug the power station into the cigarette lighter socket to charge it. Once you arrive at your destination, you can continue charging it with a flexible or fixed solar panel. This ensures that the power station is always ready for use and that you always have enough power available.
